[Guide] Best Left To Right Trico Guide (Exact)

[ggFat]

I have taken the time and liberty to fix all the mistakes the other trico guiders have made, being accurate. I have also extended it up to 1.5 screens. You'll always be told to use the same powers, but are they correct? Well these ones are 100% accurate. If you somehow find mistakes (which you 99% of the time you won't) tell me please. These are from 1/8 screen to 1.5 screen, if it says 'a bit over' or 'a bit under' that means between 1mm and 1cm not too much.


Trico Left To Right :


1/8 = 88 3.73 (Bit over)
1/8 = 80 1.48
1/8 = 87 2.66

1/4 = 68 1.48
1/4 = 87 3.77 (Bit under)
1/4 = 83 2.6 (Bit under)

3/8 = 85 3.75
3/8 = 80 2.62
3/8 = 55 1.54

1/2 = 76 2.65
1/2 = 83 3.72 (Bit over)
1/2 = 44 1.73

5/8 = 33 2.0
5/8 = 72 2.61
5/8 = 81 3.7 (Bit over)

3/4 = 69 2.66
3/4 = 80 3.72 (Bit under)

7/8 = 65 2.7
7/8 = 78 3.74

4/4 = 61 2.75
4/4 = 76 3.75 (Bit over)

4/4 + 1/8 = 74 3.71

4/4 + 1/4 = 72 3.72

4/4 + 3/8 = 70 3.8 (Bit over)

4/4 + 1/2 = 48 3.11
4/4 + 1/2 = 69 3.8 (Bit under)



Hope you enjoy being the best trico player you can, and for people who want to use this for another site or tell a friend you must contact me at contraction@hotmail.com telling me who you are and where you are going to be using this. Thanks for reading and I hope you enjoy!  :lol:

[Scala]

Damn.  Did you complile all this yourself?  Well done!

[mezzaninex]

good job bud. most of the numbers are what I got.. some are different. I choose to keep my information to myself and my guild (nS`T) however.

"1/8 = 88 3.73 (Bit over)"

thats my only major problem with what you got... its way over. I just left that measurement out, its right inbetween angles if you use the right power =/

also, "7/8 = 78 3.74"
lands perfectly, but at 650 pixels ( 7/8ths is 700 pixels )

your other measurements, such as "4/4 + 1/2 = 48 3.11" are dead on perfect though :

[ggFat]

Damn.  Did you complile all this yourself?  Well done!

Thanks

[ggFat]

good job bud. most of the numbers are what I got.. some are different. I choose to keep my information to myself and my guild (nS`T) however.

"1/8 = 88 3.73 (Bit over)"

thats my only major problem with what you got... its way over. I just left that measurement out, its right inbetween angles if you use the right power =/

also, "7/8 = 78 3.74"
lands perfectly, but at 650 pixels ( 7/8ths is 700 pixels )

your other measurements, such as "4/4 + 1/2 = 48 3.11" are dead on perfect though :

Perfectionate   :angry:   And also, the 88 3.73 only reason why it's over because if you do 89 it's a lot under, so either way you can bite me    

[Ramza]

Haven't seen some good material in here for a while! Moved to Guides.

[YagamiTM]

excuse me but 83 2.72 dont hit 1/2 sd

[ggFat]

excuse me but 83 2.72 dont hit 1/2 sd

Sorry, I shall edit that, it is * 3.72 *

Thank you for spotting it out.






Also, ty Ramza  :lol:  

[creedo]

nice work. I'd like to put it on my site, if that's ok.
Also, are you working on a right to left guide? Then you'd have the perfect trico 0 wind guide.

[ggFat]

nice work. I'd like to put it on my site, if that's ok.
Also, are you working on a right to left guide? Then you'd have the perfect trico 0 wind guide.

Creedo, you know what, your a pain in the arse.  :<_<: I've been trying to get a hold of you for ages telling you that I have a guide, but {ignored} Well anyways you are welcome to, and also a response to that answer, I am trying to make it but it been very difficult since I have other things to do and also right to left is harder for me  :wacko:



P.S (Creedo) - I'll keep you posted on that.